MODEL CPH
Capacitive Proximity Switch
Compact, Low Cost, Low Profile, High Value!
These level sensors are a great choice where compact size and being minimally invasive is required. Capacitive proximity switches are an ideal choice for small machine hoppers and bins. Used exclusively where the solid-state output of these sensors is an input to a PLC/DCS, and where no high current switching is required. They are of the M30 size, can be provided with either 2-wire AC or 4-wire DC (NPN or PNP) output and are applicable for use with clean liquids as well as dry and free-flowing bulk solids with moderate dielectric properties.
AC or DC switches
Shielded or unshielded designs for flush or invasive mounting
Solidstate design, no moving parts
Normally open or normally closed
Compact 30mm M30 size
LED indicates sensing condition
Up to 30mm sensing distance
Prewired 2m long cable
Sensor mounting accessories available
MODEL CPH
Capacitive Proximity Switch
Compact, Low Cost, Low Profile, High Value!
These level sensors are a great choice where compact size and being minimally invasive is required. Capacitive proximity switches are an ideal choice for small machine hoppers and bins. Used exclusively where the solid-state output of these sensors is an input to a PLC/DCS, and where no high current switching is required. They are of the M30 size, can be provided with either 2-wire AC or 4-wire DC (NPN or PNP) output and are applicable for use with clean liquids as well as dry and free-flowing bulk solids with moderate dielectric properties.
AC or DC switches
Shielded or unshielded designs for flush or invasive mounting
Solidstate design, no moving parts
Normally open or normally closed
Compact 30mm M30 size
LED indicates sensing condition
Up to 30mm sensing distance
Prewired 2m long cable
Sensor mounting accessories available
Principal of Operation
Capacitive proximity switches consist of an RC-oscillator with a special multi-part sensing electrode. When the target material is removed from within the active zone, the oscillator is undamped and the oscillation amplitude decreases. The amplifier of the oscillator voltage and the sensitivity of the sensor can be altered by the built-in potentiometer. This allows for a “calibration” for the proximity of the target to activation of the sensor.
Application and Use
Capacitive proximity switches can be either shielded or unshielded and can be used to detect high, low and intermediate levels in tanks and bins. Shielded sensors can be embedded within a vessel wall so that the sensor face is flush with the inside wall of a vessel. Unshielded sensors detect from the face and from the circumference of the front part of the sensor and therefore cannot be embedded.
Vessel contents or target materials to be sensed can be fluids, powders or granulated materials such as PVC powder, dyes, flour, sugar, powdered milk and many other clean and free-flowing materials.
Common applications also include use as end or limit switches for checking and regulating machinery settings. This includes even non-metallic targets such as in conveyor belt positioning and material stacking applications. Capacitive proximity switches can also be used as detectors for counting metallic and non-metallic components.
Technical Data
| Housing | 30mm diameter x 80mm long; PBT plastic case; IP67 |
| Process Temp | -13° F to +158° F (-25° C to +70° C) |
| Ambient Temp | -13° F to +158° F (-25° C to +70° C) |
| Sensing Distance | Varies by Model; Up to 30mm Distance; Adjustable setting Adjustable setting |
| Wire Connection | 2m Prewired Cable |
| Maximum Load | 300mA |
| Process Connection | 30mm Threaded; Optional Sensor Mounting Wells and Accessories Available |
| Certification | Ordinary Location; CE mark |
More Information
Click here to download product line PDF’s
Models Available
- 2-Wire AC, N.O., Unshielded/Shielded, 2m Cable
- 2-Wire AC, N.C., Unshielded/Shielded, 2m Cable
- 4-Wire DC, PNP, N.O./N.C., Unshielded/Shielded, 2m Cable
- 4-Wire DC, NPN, N.O./N.C., Unshielded/Shielded, 2m Cable
Principal of Operation
Capacitive proximity switches consist of an RC-oscillator with a special multi-part sensing electrode. When the target material is removed from within the active zone, the oscillator is undamped and the oscillation amplitude decreases. The amplifier of the oscillator voltage and the sensitivity of the sensor can be altered by the built-in potentiometer. This allows for a “calibration” for the proximity of the target to activation of the sensor.
Application and Use
Capacitive proximity switches can be either shielded or unshielded and can be used to detect high, low and intermediate levels in tanks and bins. Shielded sensors can be embedded within a vessel wall so that the sensor face is flush with the inside wall of a vessel. Unshielded sensors detect from the face and from the circumference of the front part of the sensor and therefore cannot be embedded.
Vessel contents or target materials to be sensed can be fluids, powders or granulated materials such as PVC powder, dyes, flour, sugar, powdered milk and many other clean and free-flowing materials.
Common applications also include use as end or limit switches for checking and regulating machinery settings. This includes even non-metallic targets such as in conveyor belt positioning and material stacking applications. Capacitive proximity switches can also be used as detectors for counting metallic and non-metallic components.
Technical Data
| Housing | 30mm diameter x 80mm long; PBT plastic case; IP67 |
| Process Temp | -13° F to +158° F (-25° C to +70° C) |
| Ambient Temp | -13° F to +158° F (-25° C to +70° C) |
| Sensing Distance | Varies by Model; Up to 30mm Distance; Adjustable setting Adjustable setting |
| Wire Connection | 2m Prewired Cable |
| Maximum Load | 300mA |
| Process Connection | 30mm Threaded; Optional Sensor Mounting Wells and Accessories Available |
| Certification | Ordinary Location; CE mark |
More Information
Click here to download product line PDF’s
Models Available
- 2-Wire AC, N.O., Unshielded/Shielded, 2m Cable
- 2-Wire AC, N.C., Unshielded/Shielded, 2m Cable
- 4-Wire DC, PNP, N.O./N.C., Unshielded/Shielded, 2m Cable
- 4-Wire DC, NPN, N.O./N.C., Unshielded/Shielded, 2m Cable
Ordering Information
Sensor Final Assembly Part Number Structure
Ordering Information
Sensor Final Assembly Part Number Structure
1 – Unshielded
2 – Shielded
1 – AC 2-wir
2 – DC NPN 4-wire
3 – DC PNP 4-wire
1 – N.O. (AC only)
2 – N.C. (AC only)
3 – N.O./N.C. (DC only)
1 – Ordinary Locations
1 – 30mm
1 – Unshielded
2 – Shielded
1 – AC 2-wir
2 – DC NPN 4-wire
3 – DC PNP 4-wire
1 – N.O. (AC only)
2 – N.C. (AC only)
3 – N.O./N.C. (DC only)
1 – Ordinary Locations
1 – 30mm